Solid Surface Tooling

2 Flute Flush Trim Down Cut x 1/4” x 1” CL x 1/4” Shank x 3” Overall Solid Carbide 2 Flute bit

2 Flute Flush Trim Down Cut x 1/4” x 1” CL x 1/4” Shank x 3” Overall Solid Carbide 2 Flute bit

$40.83
2 Flute Flush Trim Down Cut 1/2” x 1 1/4” CL x 1/2” Shank x 4” Overall Solid Carbide 2 Flute bit

2 Flute Flush Trim Down Cut 1/2” x 1 1/4” CL x 1/2” Shank x 4” Overall Solid Carbide 2 Flute bit

$79.89
2 Flute Flush Trim Down Cut 1/2” x 2” CL x 1/2” Shank x 4 1/2” Overall Solid Carbide 2 Flute Bit

2 Flute Flush Trim Down Cut 1/2” x 2” CL x 1/2” Shank x 4 1/2” Overall Solid Carbide 2 Flute Bit

$97.63
2 Flute Flush Trim Up Cut 1/2” x 1” 1/4” CL x 1/2” Shank x 3 1/2” Overall Solid Carbide 2 Flute Bit

2 Flute Flush Trim Up Cut 1/2” x 1” 1/4” CL x 1/2” Shank x 3 1/2” Overall Solid Carbide 2 Flute Bit

$79.89
2 Flute Flush Trim Up Cut 1/2” x 2” CL x 1/2” Shank x 4 1/2” Overall Solid Carbide 2 Flute Bit

2 Flute Flush Trim Up Cut 1/2” x 2” CL x 1/2” Shank x 4 1/2” Overall Solid Carbide 2 Flute Bit

$97.63
Undermount Bowl Bit With Bearing 2 1/4” D x 1 1/4” CL x 1/2” Shk x 1/2” Radius x 3 3/16” Oal 20 Deg Angle

Undermount Bowl Bit With Bearing 2 1/4” D x 1 1/4” CL x 1/2” Shk x 1/2” Radius x 3 3/16” Oal 20 Deg Angle

$119.18
Undermount Bowl Bit With Bearing 2 1/8” D x 7/8” CL x 1/2” Shk x 3/8” Radius x 2 13/16” Oal 10 Deg Angle

Undermount Bowl Bit With Bearing 2 1/8” D x 7/8” CL x 1/2” Shk x 3/8” Radius x 2 13/16” Oal 10 Deg Angle

$113.05
Undermount Bowl Bit With Bearing 2 1/8” D x 1 1/4” CL x 1/2” CL x 1/2” Radius x 3 3/16” Oal 20 Deg Angle

Undermount Bowl Bit With Bearing 2 1/8” D x 1 1/4” CL x 1/2” CL x 1/2” Radius x 3 3/16” Oal 20 Deg Angle

$113.05
Undermount Bowl Bit With Bearing 2 3/8” D x 7/8” CL x 1/2” Shk x 1/2” Radius x 3 3/16” Oal 10 Deg Angle

Undermount Bowl Bit With Bearing 2 3/8” D x 7/8” CL x 1/2” Shk x 1/2” Radius x 3 3/16” Oal 10 Deg Angle

$125.34
Undermount Bowl Bit With Bearing 2 1/8” D x 7/8” CL x 1/2” Shk x 3/8” Radius x 2 13/16” Oal 15 Deg Angle

Undermount Bowl Bit With Bearing 2 1/8” D x 7/8” CL x 1/2” Shk x 3/8” Radius x 2 13/16” Oal 15 Deg Angle

$123.94
Undermount Bowl Bit With Bearing 2 3/8” D x 7/8” CL x 1/2” Shk x 1/2” Radius x 2 3/16” Oal 15 Deg Angle

Undermount Bowl Bit With Bearing 2 3/8” D x 7/8” CL x 1/2” Shk x 1/2” Radius x 2 3/16” Oal 15 Deg Angle

$125.34
Solid Surface Bevel Bit 1 3/8” D x 1” CL x 1/2” Shk x 2 15/16” Oal x 10 Degree Angle

Solid Surface Bevel Bit 1 3/8” D x 1” CL x 1/2” Shk x 2 15/16” Oal x 10 Degree Angle

$98.31
Solid Surface Bevel Bit 1 3/8” D x 1” CL x 1/2” Shk x 2 15/16” Oal x 12 Degree Angle

Solid Surface Bevel Bit 1 3/8” D x 1” CL x 1/2” Shk x 2 15/16” Oal x 12 Degree Angle

$98.31
Solid Surface Flush Trim 3/4” D x 1 3/4” CL x 1/2” Shk x 3 5/8” Oal

Solid Surface Flush Trim 3/4” D x 1 3/4” CL x 1/2” Shk x 3 5/8” Oal

$52.02
Solid Surface Flush Trim 3/4” D x 1” CL x 1/2” Shk x 3 1/8” Oal

Solid Surface Flush Trim 3/4” D x 1” CL x 1/2” Shk x 3 1/8” Oal

$38.94
Solid Surface Flush Trim 3/4” D x 1 1/4” CL x 1/2” Shk x 3 3/8” Oal

Solid Surface Flush Trim 3/4” D x 1 1/4” CL x 1/2” Shk x 3 3/8” Oal

$47.69
Solid Surface Flush Trim 3/4” D x 1 1/2” CL x 1/2” Shk x 3 5/8” Oal

Solid Surface Flush Trim 3/4” D x 1 1/2” CL x 1/2” Shk x 3 5/8” Oal

$54.17
Replacement Bearing For Bevel And Overhang Trim Bits

Replacement Bearing For Bevel And Overhang Trim Bits

$16.83
Replacement Bearing For Flush Trim Bits

Replacement Bearing For Flush Trim Bits

$15.60
Solid Surface Overhang Trim 3/4” D x 1” CL x 1/2” Shk x 3 1/8” Oal

Solid Surface Overhang Trim 3/4” D x 1” CL x 1/2” Shk x 3 1/8” Oal

$50.34
Solid Surface Overhang Trim 3/4” D x 1 1/4” CL x 1/2” Shk x 3 3/8” Oal

Solid Surface Overhang Trim 3/4” D x 1 1/4” CL x 1/2” Shk x 3 3/8” Oal

$49.85
Drain Board Bit 1/2” D x 1/2” CL x 1/2” Shk x 2” Oal x 1/8” Radius

Drain Board Bit 1/2” D x 1/2” CL x 1/2” Shk x 2” Oal x 1/8” Radius

$43.98
Drain Board Bit 5/8” D x 1/2” CL x 1/2” Shk x 2” Oal x 1/8” Radius

Drain Board Bit 5/8” D x 1/2” CL x 1/2” Shk x 2” Oal x 1/8” Radius

$46.92
Drain Board Bit 3/4” D x 1/2” CL x 1/2” Shk x 2” Oal x 1/8” Radius

Drain Board Bit 3/4” D x 1/2” CL x 1/2” Shk x 2” Oal x 1/8” Radius

$49.85

Solid Surface Tooling

Rapid Tools Solid surface are excellent for materials made by Wilsonart®, Avonite®, Gibraltar®, Corian®, Delrin® & more.

Filter

2 Flute Flush Trim Down Cut x 1/4” x 1” CL x 1/4” Shank x 3” Overall Solid Carbide 2 Flute bit

2 Flute Flush Trim Down Cut 1/2” x 1 1/4” CL x 1/2” Shank x 4” Overall Solid Carbide 2 Flute bit

2 Flute Flush Trim Down Cut 1/2” x 2” CL x 1/2” Shank x 4 1/2” Overall Solid Carbide 2 Flute Bit

2 Flute Flush Trim Up Cut 1/2” x 1” 1/4” CL x 1/2” Shank x 3 1/2” Overall Solid Carbide 2 Flute Bit

2 Flute Flush Trim Up Cut 1/2” x 2” CL x 1/2” Shank x 4 1/2” Overall Solid Carbide 2 Flute Bit

Undermount Bowl Bit With Bearing 2 1/4” D x 1 1/4” CL x 1/2” Shk x 1/2” Radius x 3 3/16” Oal 20 Deg Angle

Undermount Bowl Bit With Bearing 2 1/8” D x 7/8” CL x 1/2” Shk x 3/8” Radius x 2 13/16” Oal 10 Deg Angle

Undermount Bowl Bit With Bearing 2 1/8” D x 1 1/4” CL x 1/2” CL x 1/2” Radius x 3 3/16” Oal 20 Deg Angle

Undermount Bowl Bit With Bearing 2 3/8” D x 7/8” CL x 1/2” Shk x 1/2” Radius x 3 3/16” Oal 10 Deg Angle

Undermount Bowl Bit With Bearing 2 1/8” D x 7/8” CL x 1/2” Shk x 3/8” Radius x 2 13/16” Oal 15 Deg Angle

Undermount Bowl Bit With Bearing 2 3/8” D x 7/8” CL x 1/2” Shk x 1/2” Radius x 2 3/16” Oal 15 Deg Angle

Solid Surface Bevel Bit 1 3/8” D x 1” CL x 1/2” Shk x 2 15/16” Oal x 10 Degree Angle

Solid Surface Bevel Bit 1 3/8” D x 1” CL x 1/2” Shk x 2 15/16” Oal x 12 Degree Angle

Solid Surface Flush Trim 3/4” D x 1 3/4” CL x 1/2” Shk x 3 5/8” Oal

Solid Surface Flush Trim 3/4” D x 1” CL x 1/2” Shk x 3 1/8” Oal

Solid Surface Flush Trim 3/4” D x 1 1/4” CL x 1/2” Shk x 3 3/8” Oal

Solid Surface Flush Trim 3/4” D x 1 1/2” CL x 1/2” Shk x 3 5/8” Oal

Replacement Bearing For Bevel And Overhang Trim Bits

Replacement Bearing For Flush Trim Bits

Solid Surface Overhang Trim 3/4” D x 1” CL x 1/2” Shk x 3 1/8” Oal

Solid Surface Overhang Trim 3/4” D x 1 1/4” CL x 1/2” Shk x 3 3/8” Oal

Drain Board Bit 1/2” D x 1/2” CL x 1/2” Shk x 2” Oal x 1/8” Radius

Drain Board Bit 5/8” D x 1/2” CL x 1/2” Shk x 2” Oal x 1/8” Radius

Drain Board Bit 3/4” D x 1/2” CL x 1/2” Shk x 2” Oal x 1/8” Radius

Your cart is empty

Your cart is empty

Solid Surface Tooling

Rapid Tools Solid surface are excellent for materials made by Wilsonart®, Avonite®, Gibraltar®, Corian®, Delrin® & more.

Active filters:

2 Flute Flush Trim Down Cut x 1/4” x 1” CL x 1/4” Shank x 3” Overall Solid Carbide 2 Flute bit

2 Flute Flush Trim Down Cut 1/2” x 1 1/4” CL x 1/2” Shank x 4” Overall Solid Carbide 2 Flute bit

2 Flute Flush Trim Down Cut 1/2” x 2” CL x 1/2” Shank x 4 1/2” Overall Solid Carbide 2 Flute Bit

2 Flute Flush Trim Up Cut 1/2” x 1” 1/4” CL x 1/2” Shank x 3 1/2” Overall Solid Carbide 2 Flute Bit

2 Flute Flush Trim Up Cut 1/2” x 2” CL x 1/2” Shank x 4 1/2” Overall Solid Carbide 2 Flute Bit

Undermount Bowl Bit With Bearing 2 1/4” D x 1 1/4” CL x 1/2” Shk x 1/2” Radius x 3 3/16” Oal 20 Deg Angle

Undermount Bowl Bit With Bearing 2 1/8” D x 7/8” CL x 1/2” Shk x 3/8” Radius x 2 13/16” Oal 10 Deg Angle

Undermount Bowl Bit With Bearing 2 1/8” D x 1 1/4” CL x 1/2” CL x 1/2” Radius x 3 3/16” Oal 20 Deg Angle

Undermount Bowl Bit With Bearing 2 3/8” D x 7/8” CL x 1/2” Shk x 1/2” Radius x 3 3/16” Oal 10 Deg Angle

Undermount Bowl Bit With Bearing 2 1/8” D x 7/8” CL x 1/2” Shk x 3/8” Radius x 2 13/16” Oal 15 Deg Angle

Undermount Bowl Bit With Bearing 2 3/8” D x 7/8” CL x 1/2” Shk x 1/2” Radius x 2 3/16” Oal 15 Deg Angle

Solid Surface Bevel Bit 1 3/8” D x 1” CL x 1/2” Shk x 2 15/16” Oal x 10 Degree Angle

Solid Surface Bevel Bit 1 3/8” D x 1” CL x 1/2” Shk x 2 15/16” Oal x 12 Degree Angle

Solid Surface Flush Trim 3/4” D x 1 3/4” CL x 1/2” Shk x 3 5/8” Oal

Solid Surface Flush Trim 3/4” D x 1” CL x 1/2” Shk x 3 1/8” Oal

Solid Surface Flush Trim 3/4” D x 1 1/4” CL x 1/2” Shk x 3 3/8” Oal

Solid Surface Flush Trim 3/4” D x 1 1/2” CL x 1/2” Shk x 3 5/8” Oal

Replacement Bearing For Bevel And Overhang Trim Bits

Replacement Bearing For Flush Trim Bits

Solid Surface Overhang Trim 3/4” D x 1” CL x 1/2” Shk x 3 1/8” Oal

Solid Surface Overhang Trim 3/4” D x 1 1/4” CL x 1/2” Shk x 3 3/8” Oal

Drain Board Bit 1/2” D x 1/2” CL x 1/2” Shk x 2” Oal x 1/8” Radius

Drain Board Bit 5/8” D x 1/2” CL x 1/2” Shk x 2” Oal x 1/8” Radius

Drain Board Bit 3/4” D x 1/2” CL x 1/2” Shk x 2” Oal x 1/8” Radius